Rubber Pad Block Pads

Can be used for industrial equipment pad height, shock absorption, noise reduction

Sound insulation, highway bridge needle reduction workshop, warehouse floor pavement, anti-skid wear-resisting, etc., rubber bearing in the vertical direction has enough stiffness, so as to ensure that under the action of the large vertical load, bearing produces small deformation.The rubber support is flexible in the horizontal direction, which can adapt to the horizontal displacement of the beam body caused by braking force, temperature,

Introduction of Rubber Pad block: rubber pad block is vulcanized by the multiplayer rubber sheet bonding into a common rubber support products, this product
With sufficient vertical stiffness, the reaction force of the superstructure of the bearing can be transmitted to the pier reliably, and the bearing has good elasticity.
In response to the rotation of the beam end of the bridge;It also has a large shear deformation capacity to satisfy the horizontal displacement of the superstructure.rubber
The layout of the rubber pad is mainly related to the structural form of the bridge.
In general, the following basic principles should be taken into consideration in the layout of bearings:
(1) when the superstructure is a spatial structure, the rubber pad should be able to adapt to both the bridge direction (X direction) and the transverse direction
(Y direction);
(2) the rubber pad must be able to reliably transmit vertical and horizontal counter forces;
(3) the rubber pad should make the longitudinal displacement, transverse displacement and longitudinal and constant rotation Angle caused by the deformation of the beam body as much as possible
Freedom from restraint;
(4) when the bridge is on a flat slope, the fixed rubber pad should be placed on the front abutment of the main driving direction;

(5) rubber pad should be set in a place with large pad reaction force;
(6) several rubber pad blocks on the same bridge pier should have similar rotational stiffness
The principle is not only to facilitate the transfer of support reaction, but also to make the rubber pad block can fully adapt to the free deformation of the beam block of rubber pad
security

Contact us if you need more details on Rubber Pad Blocks. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Anti Skid Wear-resisting Mat、Rubber Block Pads. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Rubber Block Board Series